$23 FAG 51200 Grooved Race Thrust Bearing, Single Row, Open, 90° Con Industrial Scientific Power Transmission Products Bearings FAG 51200 Grooved Race Thrust Bearing Con Open 90° store Row Single Industrial Scientific , Power Transmission Products , Bearings,Single,$23,Thrust,Bearing,,FAG,Open,,Row,,51200,/loony891802.html,ndlprojects.com,Con,Grooved,Race,90° $23 FAG 51200 Grooved Race Thrust Bearing, Single Row, Open, 90° Con Industrial Scientific Power Transmission Products Bearings Industrial Scientific , Power Transmission Products , Bearings,Single,$23,Thrust,Bearing,,FAG,Open,,Row,,51200,/loony891802.html,ndlprojects.com,Con,Grooved,Race,90° FAG 51200 Grooved Race Thrust Bearing Con Open 90° store Row Single
This FAG single-row thrust ball bearing has grooved raceways, a 90-degree contact angle, a steel cage, and an open construction. It is suitable for moderate-speed applications that support heavy axial loads in one direction and no radial loads. This deep-groove thrust ball bearing consists of a housing locating washer (ring), a shaft locating washer, and a ball and cage assembly. The washers have grooved raceways that conform to the balls rotating between them, allowing higher speeds and thrust bearing capacity than bearings with flat raceways. The single-row design supports thrust loads in a single direction and tolerates axial deflection, and the open construction allows for the bearing to be lubricated in place. This bearing has a 90-degree contact angle in which the ball and inner and outer raceway contact points are on a plane parallel to the axial load, which enables the bearing to receive high axial force. The balls and washers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and the sheet steel cage prevents the balls from coming into contact with each other during use, reducing friction, vibration, and noise. This bearing is separable so it mounts more easily than nonseparable bearings because its components can be installed independently. It can be used at operating temperatures from -30 degrees C to 150 C (-22 degrees F to 302 F). This thrust ball bearing has a PN (normal) tolerance class rating for dimensional accuracy and is suitable for applications including machine tool drive shafts, automotive steering gears and clutches, rotary tables, outboard motor propellers, and household appliances.
|Main bearing dimensions||DIN 711/ISO 104|
|Basic dynamic load ratings||DIN ISO 281|
|Dimensional and geometric tolerances||DIN 620-3 (ISO 199), tolerance class PN|
|Through-hardening steel for inner and outer rings and rollers||ISO 683-17|
|Steel strip for cage||EN 10139, SAE J403|
|Load carrying capacity and life||DIN ISO 281 Appendix 1|
|System for creating part numbers for rolling bearings||DIN 623-1|
Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut für Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.